Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/18/84; site slovax.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!gamma!epsilon!zeta!sabre!petrus!bellcore!decvax!tektronix!uw-beaver!tikal!slovax!ira
From: ira@slovax.UUCP (Ira G. Chayut)
Newsgroups: net.periphs,net.wanted
Subject: JUKI 6100 - How to add extra RAM chips?
Message-ID: <153@slovax.UUCP>
Date: Fri, 13-Dec-85 14:44:53 EST
Article-I.D.: slovax.153
Posted: Fri Dec 13 14:44:53 1985
Date-Received: Mon, 16-Dec-85 05:34:21 EST
Organization: R & D Associates., Tacoma, WA
Lines: 18
Xref: watmath net.periphs:945 net.wanted:7762

I just purchased a JUKI 6100 printer and so far like it a lot.  The
manual tells me that I can boost the RAM buffer from 2K to 8K by 
adding some cheap RAM chips.  However, the manual doesn't tell me
how to get the cover off!  I found so far the four latches in the front
corners of the cover and the two screws under the carriage.  First
question is how do I get the carriage out or out of the way so I can
remove the two screws?  Also are there other hooks, switches, etc.
that I should be aware of?  As I purchased the unit via mail order,
the vendor is not very cognizant of these technical details.

Please send answers to:
	...decvax!uw-beaver!tikal!slovax!ira
Thanks...
	Ira Chayut
	R & D Associates
	3625 Perkins Lane, SW
	Tacoma, WA 98499
	(206) 581-1322