Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/18/84; site aplvax.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!mhuxr!mhuxt!houxm!vax135!cornell!bullwinkle!rochester!seismo!lll-crg!gymble!umcp-cs!aplcen!aplvax!marc
From: marc@aplvax.UUCP (Marcus H. Gates)
Newsgroups: net.unix
Subject: Modifying 4.2 Line Printer Spooler Software
Message-ID: <183@aplvax.UUCP>
Date: Tue, 17-Dec-85 13:01:10 EST
Article-I.D.: aplvax.183
Posted: Tue Dec 17 13:01:10 1985
Date-Received: Thu, 19-Dec-85 04:36:42 EST
Distribution: net
Organization: JHU/Applied Physics Lab, Laurel, MD
Lines: 18


   I am about to add somes bells and whistles to the 4.2 Line Printer
Queue and before I re-invent the wheel thought it would be a good
idea to see if anyone had already done something similar. I am 
familiar with MDQS and would rather just modify the 4.2 stuff if
possible. Some of the changes I am interested in are priorities and a 
screen-oriented lpc command (and anything else you might have already done).
Please send any replies to me and I will post the results if
enough replies are received. Thanks.

   I originally posted this to net.wanted.sources but got very few replies
only 1 or 2 of which mentioned some changes that had beem made elsewhere.
The modifications that I received mention of were for better accounting,
quotas and printing of time that a job was queued. Thanks to all who replied
to my original request, hopefully this aticl will reach a wider audience.
-- 
					marc gates
					umcp-cs!aplvax!marc