Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/18/84; site udenva.UUCP
Path: utzoo!linus!decvax!ucbvax!ucdavis!lll-crg!seismo!hao!nbires!boulder!cisden!udenva!tkoppel
From: tkoppel@udenva.UUCP (Ted Koppel)
Newsgroups: net.wanted
Subject: ADM3A questions and a Thank You
Message-ID: <1001@udenva.UUCP>
Date: Mon, 30-Dec-85 09:01:04 EST
Article-I.D.: udenva.1001
Posted: Mon Dec 30 09:01:04 1985
Date-Received: Wed, 1-Jan-86 04:21:12 EST
Reply-To: tkoppel@udenva.UUCP (Ted Koppel)
Organization: CARL -- Colorado Alliance of Research Libraries
Lines: 20


Thanks to those people who responded to my plea for a manual for an ADM3A
CRT; I have spent considerable time making the thing work (more or less)
properly.  I have two problems which are not solved, however, by the 
manual.  Your help would be appreciated:
   1.  It doesn't process control-g properly; that is , when the host
       sends out a control-G, the ADM3A screen decides to blank out,
       as opposed to beeping.  Talk about annoying !!!
   2.  It's very picky about connectivity.  Connections that were simple
       with a different terminal (dial-up lines) are met with strings
       of garbage characaters and no connections, despite the fact that
       settings (speed, parity,duplex, etc....) are identical to my
       old terminal's settings.

Any advice would be appreciated.   Thanks in advance.

-- 
       Ted Koppel : 1696 S. Mobile St. : Aurora, Colorado 80017 :
	{boulder, cires, cisden, denelcor, hao, nbires}!udenva!tkoppel
	{bilanc, csm9a, elsi, koala}!udenva!tkoppel