Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/5/84; site wang.UUCP
Path: utzoo!linus!decvax!wanginst!wang!rudy
From: rudy@wang.UUCP (Rudy Bazelmans x72609 ms 1989)
Newsgroups: net.wanted
Subject: Re: ADM3A questions and a Thank You
Message-ID: <745@wang.UUCP>
Date: Wed, 1-Jan-86 20:27:17 EST
Article-I.D.: wang.745
Posted: Wed Jan  1 20:27:17 1986
Date-Received: Fri, 3-Jan-86 03:28:59 EST
References: <1001@udenva.UUCP>
Organization: Wang Labs, Lowell MA
Lines: 12

>    1.  It doesn't process control-g properly; that is , when the host
>        sends out a control-G, the ADM3A screen decides to blank out,
>        as opposed to beeping.  Talk about annoying !!!
> -- 
>        Ted Koppel : 1696 S. Mobile St. : Aurora, Colorado 80017 :

This problem is apparently the result of a  PC-board lay-out problem.
It exists on all ADM3As; LSI will not fix it.  The  screen will blank
whenever the ring-indicator pin goes high.  The terminal can be fixed
my cutting the appropriate trace (I think it is pin 8)  on the board.
Making this change will of course void your warrantee.   You can test
the change by using a cable which lacks the pin.