Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!henry
From: henry@utzoo.UUCP (Henry Spencer)
Newsgroups: general
Subject: typesetting problem
Message-ID: <6304@utzoo.UUCP>
Date: Mon, 20-Jan-86 17:54:24 EST
Article-I.D.: utzoo.6304
Posted: Mon Jan 20 17:54:24 1986
Date-Received: Mon, 20-Jan-86 17:54:24 EST
Organization: U of Toronto Zoology
Lines: 15

Late last Thursday, we installed a major upgrade on the typesetting laser
printer.  Once the software is worked over to take advantage of it, this
should greatly improve our typesetting capabilities.  The upgrade is
SUPPOSED to be 100% compatible, but we've just discovered that it isn't.
If you've done typesetting in the last day or two, and made use of equations
or special symbols, you will find that they are not spaced properly in
the printed output.

The problem is now believed to be fixed.  If you've done a large print run
that was useless because of this problem, come see us about a refund.  If
you're doing typesetting in the next few days and it fouls up strangely,
please show it to us -- it's just possible that the fix isn't complete.
-- 
				Henry Spencer @ U of Toronto Zoology
				{allegra,ihnp4,linus,decvax}!utzoo!henry