Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/5/84; site oucs.UUCP
Path: utzoo!watmath!clyde!cbosgd!oucs!tim
From: tim@oucs.UUCP (Tim Thompson)
Newsgroups: net.auto,net.audio
Subject: Wiring of Chrysler AM-FM radio - 1985 Dodge Charger
Message-ID: <34@oucs.UUCP>
Date: Wed, 15-Jan-86 23:35:11 EST
Article-I.D.: oucs.34
Posted: Wed Jan 15 23:35:11 1986
Date-Received: Fri, 17-Jan-86 03:15:45 EST
Distribution: net
Organization: Ohio University, Athens
Lines: 18
Xref: watmath net.auto:9103 net.audio:7161


I have a 1985 Dodge Charger with an AM-FM radio, and I can't figure out 
what all the wires runing from the back of it are for. I've put in a tape
deck, and a switch that allows either the radio or the deck to output to the
speakers. When I rotate the fader switch on the radio to the read speakers
(I think, it might be the front), I get a terrible noise out of the speakers,
kind of a fast, low-pitched, rumbling noise. I also think I'm not getting
full volume out of the radio. If anyone knows what wires go where, I'd
appreciate hearing from you via uucp mail. Thanks in advance.

-- 
Tim Thompson
414 Morton Hall
Ohio University
Athens, Ohio 45701
(614) 594-5438 or (614) 594-5486

{bgsuvax,osu-eddie,cuuxb,cbdkc1,amc1,cbosgd}!oucs!tim