Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Posting-Version: version B 2.10.2 9/18/84; site cca.UUCP Path: utzoo!linus!philabs!cmcl2!harvard!think!mit-eddie!genrad!decvax!cca!diego From: diego@cca.UUCP (Diego Gonzalez) Newsgroups: net.bicycle Subject: Re: Avocet Cyclometer On Left Fork? Message-ID: <5547@cca.UUCP> Date: Thu, 9-Jan-86 11:59:52 EST Article-I.D.: cca.5547 Posted: Thu Jan 9 11:59:52 1986 Date-Received: Sat, 11-Jan-86 08:11:13 EST References: <891@rlgvax.UUCP> Organization: Computer Corp. of America, Cambridge Lines: 31 > Does anyone know if the sensor for the Avocet LCD Cyclometer can > be mounted on the *left* front fork instead of the right front > fork? (Avocet says to use the right front fork in their directions > for installation, but doesn't say if using the left fork is impossible.) > > I ask this because I currently own a Huret "rubber-band" odometer, > and would like to use them both of them at once (Huret on right front fork, > and Avocet on the left front fork). > I have an Avocet cyclometer. I can't imagine why you would want both cyclometers on your bike. However, to your question. If you place the sensor and magnet for the Avocet 20 on the left side, the sensor will have to be mounted upside down. That's because only one side of the device can read the magnetic ring on the hub. (In that position, the apparent direction of rotation would be the same as if it were on the right. However, I think you are going to have trouble because the sensor fits over the fork tip (dropout) flat above the notch. When placed in the reverse position, there is very little room for this fit and the angle of the sensor head may not align with the magnetic ring. There is only the narrowest range of adjustment possible even when mounted on top of the dropout. All I can suggest is that you go to a shop that has the Avocet 20 and try it with the mounting hardware for the unit. You need only place the magnetic ring on the hub, the wheel in the fork, and then try the sensor in various positions. (By the way, my frames are about 25.5 in. and the sensor cable is just long enough to reach.) If worse comes to worse, I'd still go with the Avocet and retire the Huret.