Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2.fluke 9/24/84; site vax3.fluke.UUCP
Path: utzoo!watmath!clyde!cbosgd!ihnp4!mhuxn!mhuxr!mhuxt!houxm!vax135!cornell!uw-beaver!fluke!rad
From: rad@fluke.UUCP (Randy Davison)
Newsgroups: net.ham-radio
Subject: Need a dish
Message-ID: <1566@vax3.fluke.UUCP>
Date: Sun, 12-Jan-86 17:06:52 EST
Article-I.D.: vax3.1566
Posted: Sun Jan 12 17:06:52 1986
Date-Received: Tue, 14-Jan-86 05:19:56 EST
Reply-To: rad@fluke.UUCP (Randy Davison)
Organization: John Fluke Mfg. Co., Inc., Everett, WA
Lines: 18

I'm looking for a four or five foot dish for WX satellite work.  Has
anyone on the net been down this road before and if so what suggestions
do you have?

Specifics:  F/D = .4 to .6
            lighter weight preferred
            .5 inch peak to peak surface deviation max
            operating freq = 1.691 Ghz.
            no feed or mounting hardware required
            lowest possible cost (naturally- otherwise this would
               be easy!) < $200


Regards,
Randy Davison
K7VOE
John Fluke Mfg.
Seattle, WA.