Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/18/84 exptools; site ihuxp.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!mhuxr!mhuxn!ihnp4!ihuxp!gvw1
From: gvw1@ihuxp.UUCP (George V. Wilder)
Newsgroups: net.micro.apple
Subject: Re: Using AppleMouse with CP/M
Message-ID: <1233@ihuxp.UUCP>
Date: Fri, 24-Jan-86 08:44:34 EST
Article-I.D.: ihuxp.1233
Posted: Fri Jan 24 08:44:34 1986
Date-Received: Sat, 25-Jan-86 08:06:12 EST
References: <650@ihwpt.UUCP>
Distribution: net
Organization: AT&T Bell Laboratories
Lines: 25

> 
> 
> Does anyone have any information on getting an AppleMouse
> card to run under CP/M 2.20.  My Apple IIe system refuses
> to boot CP/M if the AppleMouse card is present.
> 
> One more question. Assuming CP/M can be coaxed into
> booting, does anyone have any tips on how to call 6502
> routines from within CP/M programs?

I am assuming that you are using the original Microsoft CPM(tm)
card.

The AppleMouse card works fine with the PCPI Appli-Card(tm).  Also,
I have developed some routines for reading and writing 6502
memory from the Appli-Card [i.e., peek65(addr) and poke65(addr, value)].
These are Turbo Pascal routines.  I`ll be glad to share them if
anyone is interested in them (I am working on other low-level I/O
routines between the Apple and the Appli-Card).
-- 


		George V. Wilder

		         ihnp4!ihuxp!gvw1