Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.3 4.3bsd-beta 6/6/85; site amdahl.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!allegra!mit-eddie!genrad!decvax!decwrl!sun!amdahl!dwl10
From: dwl10@amdahl.UUCP (Dave Lowrey)
Newsgroups: net.micro.cbm
Subject: Re: expansion port question
Message-ID: <2547@amdahl.UUCP>
Date: Mon, 13-Jan-86 08:23:51 EST
Article-I.D.: amdahl.2547
Posted: Mon Jan 13 08:23:51 1986
Date-Received: Wed, 15-Jan-86 01:08:52 EST
References: <2970@ncsu.UUCP>
Organization: Amdahl Corporation, Columbia MD
Lines: 20
Summary: You don't need to remove FAST LOAD to disable it.

In article <2970@ncsu.UUCP>, kwf@ncsu.UUCP writes:
> 
> I use the FAST LOAD cart. by EPXY (and recommend is highly) on my c64.  It
> works well, however, it must be removed for some software packages to run.

You don't need to remove the cartridge to disable FAST LOAD. When you
power up, type the british pound sign, then return. This will put you
in the FAST LOAD menu. Then type a D (for disable). This will re-boot
the 64, but the FAST LOAD stuff is gone.

-- 
-------------------------------------------------------------------
                               Dave Lowrey

"To vacillate or not to vacillate, that is the question....
 ....or is it?"
                                ...!{ihnp4,cbosgd,hplabs}!amdahl!dwl10

[ The opinions expressed <may> be those of the author and not necessarily
  those of his most eminent employer. ]