Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 6/24/83; site trwrba.UUCP
Path: utzoo!watmath!clyde!cbosgd!ukma!psuvm.bitnet!psuvax1!burdvax!sdcrdcf!trwrb!trwrba!gibson
From: gibson@trwrba.UUCP (Gregory S. Gibson)
Newsgroups: net.micro.cbm
Subject: Re: expansion port killer switch
Message-ID: <1803@trwrba.UUCP>
Date: Tue, 21-Jan-86 13:32:12 EST
Article-I.D.: trwrba.1803
Posted: Tue Jan 21 13:32:12 1986
Date-Received: Thu, 23-Jan-86 09:33:40 EST
References: <2974@ncsu.UUCP>
Reply-To: gibson@trwrba.UUCP (Gregory S. Gibson)
Organization: TRW EDS, Redondo Beach, CA
Lines: 15

In article <2974@ncsu.UUCP> kwf@ncsu.UUCP (Kenneth W Fernald) writes:
>
>I use the FAST LOAD cartriage by EPXY.  It works great, however, some software,
>such as EASY SCRIPT refuse to run correctly while the cartriage is in the port.
>The disable function in the menu of FAST LOAD does not solve this problem.
>If the software does anything similar to a cold start, the cartriage can still
>interfere.  I was therefore forced to pull the cartriage out anytime I wanted
>to run such software.
>
I always run EASY SCRIPT successfully with FAST LOAD.  I know of only 2
programs FAST LOAD will not work with and both of those will operate with the
disable function.
>