Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/18/84; site brl-tgr.ARPA
Path: utzoo!watmath!clyde!burl!ulysses!mhuxr!mhuxt!houxm!whuxl!whuxlm!akgua!gatech!seismo!brl-tgr!tgr!jhsmith@crdc-vax2.ARPA
From: jhsmith@crdc-vax2.ARPA (Jack H. Smith)
Newsgroups: net.micro.cpm
Subject: CPT port addresses
Message-ID: <1626@brl-tgr.ARPA>
Date: Wed, 15-Jan-86 16:11:58 EST
Article-I.D.: brl-tgr.1626
Posted: Wed Jan 15 16:11:58 1986
Date-Received: Fri, 17-Jan-86 07:20:46 EST
Sender: news@brl-tgr.ARPA
Lines: 15


	
	Fellow CP/M'ers ,

		HELP!!!! I need to know the addresses for the ports on a
	CPT which runs CP/M 2.2 . Otherwise, could someone point me to 
	the modem program overlay that I could add to MODEM7, and which
	would have the ports addressed? 
		CPT is all I have on the make of the terminal. It is made
	by CPT Corporation which has world headquarters at Minneapolis. I've
	just been through the manual we received with it and, as usual, the
	ports are not addressed, worse they're not even mentioned that I
	could find.
		Please help, if you can.   Thanks.
					Jack H. Smith