Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Posting-Version: version B 2.10.2 9/17/84; site nbires.UUCP Path: utzoo!watmath!clyde!burl!ulysses!gamma!epsilon!zeta!sabre!petrus!bellcore!decvax!decwrl!pyramid!pesnta!hplabs!hao!nbires!bob From: bob@nbires.UUCP (Bob Bruck) Newsgroups: net.micro.pc Subject: Re: Re: help wanted Message-ID: <578@nbires.UUCP> Date: Fri, 10-Jan-86 12:11:39 EST Article-I.D.: nbires.578 Posted: Fri Jan 10 12:11:39 1986 Date-Received: Tue, 14-Jan-86 04:38:52 EST References: <81@druxv.UUCP> <518@ukc.UUCP> <174@intelca.UUCP> Reply-To: bob@nbires.UUCP (Bob Bruck) Organization: NBI,Inc, Boulder CO Lines: 18 In article <174@intelca.UUCP> glen@intelca.UUCP (Glen Shires) writes: >> >> In the case you mentioned (DIR B:) when you only have A and C - it isn't >> an error so no wonder you can't catch it! >> -- >YES...AND to override this handler with your own, simply install a >device driver for disk B: > Which isn't so easy to do. PC-DOS supplies a driver for disks A and B, at least, and any installable drivers would be assigned letters higher than that. The only way I can see to do this would be to capture the INT 21 Dos calls. This isn't as far-fetched as it seems - the PC-DOS ASSIGN command does this. Given that, one could install a device driver as, say, drive D (after the fixed disk), and make it LOOK like drive B with the assign command. Bob Bruck (hao | allegra | ucbvax | ...)!nbires!bob NBI Inc. Boulder, Co.