Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10 5/3/83 based; site hou2h.UUCP
Path: utzoo!watmath!clyde!cbosgd!ulysses!mhuxr!mhuxt!houxm!hou2h!mkp
From: mkp@hou2h.UUCP (M.PRATT)
Newsgroups: net.periphs
Subject: connecting an att475 printer to a 3b2
Message-ID: <1132@hou2h.UUCP>
Date: Fri, 10-Jan-86 12:41:47 EST
Article-I.D.: hou2h.1132
Posted: Fri Jan 10 12:41:47 1986
Date-Received: Sat, 11-Jan-86 07:12:24 EST
Organization: AT&T Bell Labs, Holmdel NJ
Lines: 16

I would appreciate some help from anyone who knows how
to make the att475 serial printer work with a 3b2.
I have done some of the obvious things many of you have 
mentioned in previous notes about connecting printers
to the 3b2, such as odd parity, XON/XOFF, and making
sure the baud rate is the same everywhere.
However, the printer over prints, both 80 and 40 character/line
fonts, and in general doesn't work properly.
I am using the lqp40 interface.
I have other printers operating with the 3b2, including the
ln03 laser printer by DEC, but this att475 is giving me problems.
Please, any help will be appreciated.

	Mike Pratt    AT&T Bell Labs, hou2h!mkp
		or cornet-233-6446