Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/17/84; site nbires.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!bellcore!decvax!decwrl!pyramid!hplabs!hao!nbires!nose
From: nose@nbires.UUCP (Steve Dunn)
Newsgroups: net.video
Subject: Re: editing
Message-ID: <583@nbires.UUCP>
Date: Tue, 21-Jan-86 12:26:21 EST
Article-I.D.: nbires.583
Posted: Tue Jan 21 12:26:21 1986
Date-Received: Sat, 25-Jan-86 08:36:56 EST
References: <511@ptsfc.UUCP> <518@nicmad.UUCP>
Organization: NBI,Inc, Boulder CO
Lines: 24

> In article <511@ptsfc.UUCP> bgo@ptsfc.UUCP (Bud Odekirk) writes:
> >I am preparing a video presentation for our Division Conference and I
> >am encountering problems editing out the bad stuff and keeping the good.
> >I have two VHS recorders, when I record from one to the other I get a
> >blip between each take.
> >
> >Does anyone know how to avoid the blip ??????
> >
> The only way around this problem is to purchase VHS editing decks with
> flying erase heads or to purchase 3/4" editing equipment, which also has
> flying erase heads.  I use 3/4" decks here at home for editing.

Actually this is not quite true, you don't have to *purchase* editing decks
at all. If you work for a larger size corperation they may have
an A/V dept with editing equipment that you could use. Also it most decent
sized towns you can rent time on editing equipment. Look in the yellow pages
under video production services. If I remember right, time on 1/2'' set-ups
is around $30 per hour. Another thing to consider is that some of the
newer home video decks produce a very, very short blip that might be
acceptable to you.



     			-Steve "Chainsaw" Dunn