Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.3 4.3bsd-beta 6/6/85; site ucbvax.BERKELEY.EDU
Path: utzoo!decvax!decwrl!ucbvax!works
From: works@ucbvax.UUCP
Newsgroups: mod.computers.workstations
Subject: Re: Need help in evaluating H/W and S/W
Message-ID: <8602071755.AA03672@hplabsb>
Date: Fri, 7-Feb-86 12:55:35 EST
Article-I.D.: hplabsb.8602071755.AA03672
Posted: Fri Feb  7 12:55:35 1986
Date-Received: Tue, 11-Feb-86 05:38:09 EST
References: <8601310825.AA04029@daisy.uucp>
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: The ARPA Internet
Lines: 13
Approved: works@red.rutgers.edu

I have heard lots of good things about the Daisy systems.  I have
seen some very good demonstrations of the system.  I have been using
a schematic capture application available on a large Amdahl machine.
The application routes the schematic for the engineer.  I find this
saves a lot of my time and makes changes to the schematic almost
error proof.

I was told that Daisy was going to come out with this capability in
the near future.  This was more than 2 years ago.  Is this available
today?  If not, what happened?

Ken Hodor
hplabs!hodor