Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: Notesfiles $Revision: 1.7.0.10 $; site uiucuxc
Path: utzoo!watmath!clyde!cbosgd!ihnp4!inuxc!pur-ee!uiucdcs!uiucuxc!austen
From: austen@uiucuxc.CSO.UIUC.EDU
Newsgroups: net.ham-radio.packet
Subject: Re: Packet xfer
Message-ID: <147000001@uiucuxc>
Date: Tue, 28-Jan-86 16:38:00 EST
Article-I.D.: uiucuxc.147000001
Posted: Tue Jan 28 16:38:00 1986
Date-Received: Thu, 30-Jan-86 05:38:21 EST
References: <9262@ritcv.UUCP>
Lines: 15
Nf-ID: #R:ritcv.UUCP:9262:uiucuxc:147000001:000:565
Nf-From: uiucuxc.CSO.UIUC.EDU!austen    Jan 28 15:38:00 1986


>	Is there anyone out there who has any good ideas on transfering
>.com files via packet on two IBM PC's?  We have tried xmodem, but the
>delays seem to always abort the xfer.  It there any protocal that does
>not care about time delays?
>     Cliff Skolnick
>
>{allergra, Seismo}!rochester!ritcv!cxs6277

If both TNCs are set up for 8 bit data and run in transparent mode you should
be able to transfer binary data.  Another method is to create a .HEX file
and send that; I have used this method to send CP/M binary files over packet.

Jeff, K9JA.
austen@uiucuxc