Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!cbosgd!gatech!seismo!brl-smoke!gwyn
From: gwyn@brl-smoke.ARPA (Doug Gwyn )
Newsgroups: net.micro.att
Subject: Re: 5620 DMD: to print screen image in stand-alone environment ?
Message-ID: <692@brl-smoke.ARPA>
Date: Thu, 6-Feb-86 18:45:14 EST
Article-I.D.: brl-smok.692
Posted: Thu Feb  6 18:45:14 1986
Date-Received: Tue, 11-Feb-86 04:28:36 EST
References: <13@uscvax.UUCP>
Reply-To: gwyn@brl.ARPA
Distribution: net
Organization: Ballistic Research Lab
Lines: 13

>  Is there any way to print the screen image of 5620 DMD terminal on
>a 3B2 Computer dot-matrix printer (or preferably, on a IBM PC dot-matrix
>printer) in stand-alone environment?  Is there any "screendump" and "lpg" 
>commands available in stand-alone environment now?  Any suggestions or 
>directions are very much appreciated!

Unless you have built a screen-dump subroutine into the stand-alone
program that is running in your DMD, I am afraid you are stuck.
Any attempt to load another stand-alone program into the DMD will
clobber the display.

It would be nice if there were a screen dump feature built into the
5620 firmware (accessible via SET-UP), but as of 8;7;5 there isn't.