Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!bellcore!decvax!genrad!panda!talcott!harvard!seismo!rochester!ritcv!ccivax!guest
From: guest@ccivax.UUCP (What's in a name ?)
Newsgroups: net.micro.mac
Subject: Please Help -- Hyper 20 / System problem
Message-ID: <354@ccivax.UUCP>
Date: Fri, 24-Jan-86 16:48:04 EST
Article-I.D.: ccivax.354
Posted: Fri Jan 24 16:48:04 1986
Date-Received: Thu, 30-Jan-86 01:17:54 EST
Distribution: net
Organization: CCI Telephony Systems Group,  Rochester NY
Lines: 24

*** REPLACE THIS LINE WITH YOUR MESSAGE ***
Dear Net,

This one is pretty good.  It concerns the use of MacProject and MacDraw 
from the 20 mb Hyperdrive.  Both these programs have a feature that sets
the size of the chart or drawing.  It is a dialog box with a rectangle 
separated into squares. One square is the default size (8.5 x 11). By 
clicking additional squares you can make the chart or drawing larger 
than a page (they must then be taped together).

The problem is that when these packages (not protected) are executed from
the hard disk, the size rectangle is separated into very thin vertical 
lines instead of the normal squares.  This makes it real tough to set an
appropriate size.  My drawers (sorry) are set up with a system file in 
startup and these two programs in another drawer.  I think I may be missing
some sort of secret resource on my hyper that is on both the MacDraw and
MacProject disks.

Thanx 3.1415926 for any assistance.


Sam Mantel -- Roch, NY