Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/5/84; site osu-eddie.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!mhuxr!mhuxt!houxm!mtuxo!drutx!ihnp4!cbosgd!osu-eddie!elwell
From: elwell@osu-eddie.UUCP (Clayton M. Elwell)
Newsgroups: net.micro.mac
Subject: Re: Re: Hyperdrive 2000 info from GCC
Message-ID: <1240@osu-eddie.UUCP>
Date: Mon, 3-Feb-86 16:43:06 EST
Article-I.D.: osu-eddi.1240
Posted: Mon Feb  3 16:43:06 1986
Date-Received: Fri, 7-Feb-86 10:23:43 EST
References: <412@sol1.UUCP> <290@ius2.cs.cmu.edu> <263@tolerant.UUCP> <2723@amdahl.UUCP>
Reply-To: elwell@osu-eddie.UUCP (Clayton M. Elwell)
Organization: Ohio State Univ., CIS Dept., Cols, Oh.
Lines: 13

The AppleTalk drivers are timing-sensitive, all right, but only in the
sense that you'd better not use a SLOWER processor.  Everything is
written real tightly so that the receive buffer on the SCC won't fill
up.  Using a faster processor (like an '020) should not break
AppleTalk.

I may be wrong.

-- 
				-- Clayton Elwell
				Elwell@Ohio-State.CSNET
				Elwell%Ohio-State@CSNET-RELAY.ARPA
				...!cbosgd!osu-eddie!elwell