Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.3 4.3bsd-beta 6/6/85; site amdcad.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!allegra!amdcad!jimb
From: jimb@amdcad.UUCP (Jim Budler)
Newsgroups: net.micro.mac
Subject: Re: MacTerminal 2.0 is here (OOPS)
Message-ID: <9320@amdcad.UUCP>
Date: Sat, 8-Feb-86 23:42:27 EST
Article-I.D.: amdcad.9320
Posted: Sat Feb  8 23:42:27 1986
Date-Received: Tue, 11-Feb-86 05:58:59 EST
References: <9313@amdcad.UUCP>
Reply-To: jimb@amdcad.UUCP (Jim Budler)
Organization: AMD, Sunnyvale, California
Lines: 37
Keywords: MacTerminal Upgrade

In article <9313@amdcad.UUCP> jimb@amdcad.UUCP (Jim Budler) writes:
>
>They still ship it with the stupid command shift ~ to generate a '~'.  I
>patched mine immediately as follows:
>
>Using Resedit open Macterminal, open KICH ID=256.  Near the bottom you will
>find:
>          
>	1B 90 1B 7E  1B 60 1B 7E
>	1B 90 1B 7E  1B 60 1B 7E
           ^^ ERROR!!!!
Sorry. Make that:
	1B 60 1B 7E  1B 60 1B 7E
	1B 60 1B 7E  1B 60 1B 7E
>
>change this to:
>
>	1B 60 1B 7E  1B 60 7E 7E
>	1B 60 7E 7E  7E 60 7E 7E
>
>Save.
>
>This results in:
>
>	SHIFT-` = ~	whatever other modifier keys are pressed.
>	COMMAND-` = `	in combination with any other modifiers EXCEPT shift.
>
>	` alone or with CAPS-LOCK, OPTION, or both generates an escape.
>
>This seems much easier to me.
-- 
 Jim Budler
 Advanced Micro Devices, Inc.
 (408) 749-5806
 Usenet: {ucbvax,decwrl,ihnp4,allegra,intelca}!amdcad!jimb
 Compuserve:	72415,1200