Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/18/84 exptools; site ihlpg.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!mhuxr!mhuxt!houxm!mtuxo!drutx!ihnp4!ihlpg!jcvi2
From: jcvi2@ihlpg.UUCP (Hartong)
Newsgroups: net.micro.trs-80
Subject: Re: TRS80 Model 100 modem
Message-ID: <1593@ihlpg.UUCP>
Date: Wed, 29-Jan-86 07:13:23 EST
Article-I.D.: ihlpg.1593
Posted: Wed Jan 29 07:13:23 1986
Date-Received: Thu, 30-Jan-86 06:29:25 EST
References: <1779@utecfa.UUCP>
Organization: AT&T Bell Laboratories
Lines: 12

> Does anyone know if there is a reasonably straightforward way of
> converting the modem in the model 100 to the European CCITT 300 baud
> standard? According to the technical manual the MC14412 modem chip can
> do it, but I suspect that the filters would have to be changed too.
> Any information would be very welcome.
> Thanks
> Jakkie

*** REPLACE THIS LINE WITH YOUR MESSAGE ***
Send your address to G. van der Pijl,  Kortenaerlaan 20, 1215 nh Hilversum
The Netherlands. He will be able to help you.
Good luck