Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.3 4.3bsd-beta 6/6/85; site ucbvax.BERKELEY.EDU
Path: utzoo!decvax!bellcore!ulysses!ucbvax!works
From: works@ucbvax.UUCP
Newsgroups: mod.computers.workstations
Subject: Ethernet and DEC's DELNI with non-DEC computers
Message-ID: <8602210738.AA28331@caip.rutgers.edu>
Date: Thu, 20-Feb-86 15:34:44 EST
Article-I.D.: caip.8602210738.AA28331
Posted: Thu Feb 20 15:34:44 1986
Date-Received: Sat, 22-Feb-86 02:18:22 EST
Sender: korn@ucbvax.BERKELEY.EDU
Organization: The ARPA Internet
Lines: 34
Approved: works@red.rutgers.edu

We are about to try to connect :

      1 Vax 11/780 - VMS
      2 uVax II - VMS
      1 Apollo DN660 (SYS V or Berk. 4.2 or DOMAIN/AEGIS)
      1 Sun-3/160 - UNIX
      2 Masscomp 5500 - UNIX

This is going to be done using ethernet.  I have a couple of
questions:

    1. Is there a VMS product for running TCP/IP ?
    2. Can all of these systems be used with a DELNI ?
       (A DELNI is an "Ethernet-in-a-box", eg no cable or transceiver)
    3. Should we even bother to try to get the VAX systems to talk
       to the other systems with TCP/IP ?
    4. Is there a better solution than TCP/IP for about the same cost?

Thanks in advance for any help on this.
-- 
        "It's quite easy, if you don't know how.
         That's the important bit.  Be not at all
         sure how you're doing it."
                                      -Arthur Dent


P. Allen Jensen
Manager, Systems Division
GTICES Systems Laboratory
Department of Civil Engineering
Georgia Insitute of Technology
Atlanta Georgia, 30332-0355
...!{akgua,allegra,amd,hplabs,ihnp4,masscomp,ut-ngp}!gatech!
     gitpyr!allen