Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!linus!philabs!cmcl2!seismo!lll-crg!lll-lcc!ucdavis!ucbvax!hplabs!oliveb!felix!fritz!marty
From: marty@fritz.UUCP (Marty McFadden)
Newsgroups: net.arch,net.micro.68k
Subject: Re: Re: Re:... timing loops...
Message-ID: <295@fritz.UUCP>
Date: Sun, 2-Mar-86 00:04:09 EST
Article-I.D.: fritz.295
Posted: Sun Mar  2 00:04:09 1986
Date-Received: Tue, 4-Mar-86 03:18:18 EST
References: <156@motatl.UUCP> <530@hoptoad.uucp> <6780@boring.UUCP> <221@dmsd.UUCP> <21@gilbbs.UUCP>
Reply-To: marty@fritz.UUCP (Marty McFadden)
Organization: FileNet Corp., Costa Mesa, CA
Lines: 11
Xref: linus net.arch:2482 net.micro.68k:1472

I must agree that even well documented code is still burdensome if
timing loops are needed. I recently ported Unix* System V from the
68000 to the 68020 (16 2/3 Mhz), there were unfortunately a few timing
loops that were put into the kernel that had to be changed. (talk
about finding a needle in a haystack!!)

*Unix is a trademark of Bell Laboratories

					Martin J. McFadden
					FileNet Corp
					trwrb!fritz!marty