Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/18/84; site watnot.UUCP
Path: utzoo!watmath!watnot!pswmielke
From: pswmielke@watnot.UUCP (Peter Mielke)
Newsgroups: net.bicycle
Subject: trouble with tubulars
Message-ID: <11548@watnot.UUCP>
Date: Thu, 27-Feb-86 00:53:46 EST
Article-I.D.: watnot.11548
Posted: Thu Feb 27 00:53:46 1986
Date-Received: Fri, 28-Feb-86 06:01:49 EST
Distribution: na
Organization: U of Waterloo, Ontario
Lines: 19



     Four  weeks  ago  I  got  a flat on my rear wheel ( not very
nice,  especially with tubulars ). Anyways, being too lazy to fix
the flat I put on a new tubular ( just applying the glue onto the
old  glue  ). Everything is fine and dandy until yesterday when I
notice that the valve is bending to one side.  It was then that I
noticed ( much to my shock ) that there was no adheasion
between   the  rim  and  tire  at all. This I found very peculiar
because  in  the summer when I got a flat I just put the new glue
on top of the old layer and I never had any problems.

     Is there anything I can do about this or should I remove the
old layer of glue altogether, and if so what is the best way.

     			Peter Mielke
			
			pswmielke@watnot