Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!cbosgd!gatech!gt-stratus!gitpyr!wutka
From: wutka@gitpyr.UUCP (Mark Wutka)
Newsgroups: net.micro.amiga
Subject: Parity on serial port
Message-ID: <1435@gitpyr.UUCP>
Date: Mon, 17-Feb-86 18:35:19 EST
Article-I.D.: gitpyr.1435
Posted: Mon Feb 17 18:35:19 1986
Date-Received: Tue, 18-Feb-86 04:20:04 EST
Organization: Georgia Institute of Technology, Atlanta
Lines: 18


  According to the ROM Kernel Manual, I can get even parity by setting
the SERF_PARTY_ON flag and by not setting the SERF_PARTY_ODD flag.
This doesn't seem to work. I even tried changing the number of data bits
just in case the parity affected it and it didn't work. I had the same
problem when doing serial IO from Amigabasic. Is there something wrong
with the parity routines ?

-- 
Mark Wutka
Office of Computing Services
Georgia Institute of Technology
Atlanta, Ga.

...!{akgua,allegra,amd,hplabs,ihnp4,masscomp,ut-ngp}!gatech!gitpyr!wutka
...!{rlgvax,sb1,uf-cgrl,unmvax,ut-sally}!gatech!gitpyr!wutka

Official member of NERDS (NERDS Existing in a Recursively Defined System)