Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 (Tek) 9/28/84 based on 9/17/84; site tekigm2.UUCP
Path: utzoo!linus!decvax!tektronix!tekigm2!wrd
From: wrd@tekigm2.UUCP (Bill Dippert)
Newsgroups: net.micro.atari8
Subject: Re: 130XE Terminal Emulator (needed)
Message-ID: <459@tekigm2.UUCP>
Date: Thu, 20-Feb-86 17:31:59 EST
Article-I.D.: tekigm2.459
Posted: Thu Feb 20 17:31:59 1986
Date-Received: Mon, 24-Feb-86 05:30:45 EST
References: <169@usl-pc.UUCP> <157@lll-lcc.UUcp>
Organization: Tektronix, Beaverton OR
Lines: 15

> In article <169@usl-pc.UUCP>, djg@usl-pc.UUCP (Darell James Godeaux) writes:
> > 
> > I was wondering if anyone has .. a terminal program or an emulator 
> > for the Atari 130XE that will allow me to use 'vi' or any other screen
> > oriented functions.  (Possibly one that works with Omniview XE)  
> > 
Try also:  Chameleon by Antic magazine (publisher/seller).  It has a termcap
in the instructions which works with version 4.2 BSD of "UNIX".  I have been
using this for sometime without any problems.  The 40 character screen width
is handled by horizontal scrolling which is better than nothing but could
be improved upon.  Omniview does not work with Chameleon, as far as I know.  
It will work with any Atari 300 baud modem or any Hayes compatible 300/1200/
2400 baud modem (with 850 interface).

--Bill--