Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Posting-Version: version B 2.10.3 4.3bsd-beta 6/6/85; site amdahl.UUCP Path: utzoo!watmath!clyde!burl!ulysses!bellcore!decvax!decwrl!amdcad!amdahl!dwl10 From: dwl10@amdahl.UUCP (Dave Lowrey) Newsgroups: net.micro.cbm Subject: "Paint/Draw" program wanted Message-ID: <2868@amdahl.UUCP> Date: Tue, 4-Mar-86 14:05:53 EST Article-I.D.: amdahl.2868 Posted: Tue Mar 4 14:05:53 1986 Date-Received: Fri, 7-Mar-86 04:52:19 EST Organization: Amdahl Corporation, Columbia MD Lines: 45 Keywords: c64 paint draw picture printer I am looking for a Painting/Drawing program for my C64. The following features are required: The ability to print my drawing on my Gemini 10X printer. The ability to put text in any position on the drawing. Automatic generation of circles, given a center and radius. Automatic generation of Rectangles(sp?), given a corner, height, and width. Automatic generation of lines, given both endpoints. "Freehand" drawing. Multiple width lines. The ability to save and recall drawings. The following features are highly desirable: Rubberbanding. The ability to define an "object", move it around the page, multiply it, save it to disk and re-call it. Shading Multiple text fonts Text rotation Not required at all: Color (It's going to a black & white printer!) If you have a drawing program, or even if you have only heard of one, I would like to hear from you. Please try to rate it acording to the above mentioned features. If it has additional features, please mention them. And I would also like a brief review on how "good" it is. Please E-Mail responses. I will post the results if requested. Thanks in advance...... -- ------------------------------------------------------------------- Dave Lowrey "To vacillate or not to vacillate, that is the question.... ....or is it?" ...!{ihnp4,cbosgd,hplabs}!amdahl!dwl10 [ The opinions expressed be those of the author and not necessarily those of his most eminent employer. ]