Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.3 4.3bsd-beta 6/6/85; site amdcad.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!allegra!amdcad!jimb
From: jimb@amdcad.UUCP (Jim Budler)
Newsgroups: net.micro.mac
Subject: Re: MacTerminal 2.0 is here
Message-ID: <9583@amdcad.UUCP>
Date: Sun, 16-Feb-86 18:33:33 EST
Article-I.D.: amdcad.9583
Posted: Sun Feb 16 18:33:33 1986
Date-Received: Mon, 17-Feb-86 06:21:52 EST
References: <9313@amdcad.UUCP> <389@ccivax.UUCP>
Reply-To: jimb@amdcad.UUCP (Jim Budler)
Organization: AMD, Sunnyvale, California
Lines: 20

In article <389@ccivax.UUCP> sam@ccitv3.UUCP writes:
>> 	2) MacBinary mode Xmodem
>>...
>> 	5) Standard Xmodem
>> Only mode 4 uses the non-standard Xmodem self initiating, the rest require you
>> to select receive file, which brings up an SFPutFile Dialog.
>> 
>Sounds great.  Thanx mucho for the info.  One quick question remains.  When
>using Compuserve (MACUS) and the 'dow name/proto:xmodem' command from the
>data libraries; does this correspond to selection 5 above, or is it (2)?
>Many thanx.

Well I've used MacBinary mode (2) on MAUG and it works fine.
-- 
 Jim Budler
 Advanced Micro Devices, Inc.
 (408) 749-5806
 Usenet: {ucbvax,decwrl,ihnp4,allegra,intelca}!amdcad!jimb
 Compuserve:	72415,1200