Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/18/84; site nyit.UUCP
Path: utzoo!linus!philabs!nyit!aca
From: aca@nyit.UUCP (Al Arthur)
Newsgroups: net.micro.pc
Subject: IBM PCjr RGB monitor signals (HELP)
Message-ID: <216@nyit.UUCP>
Date: Mon, 24-Feb-86 21:58:02 EST
Article-I.D.: nyit.216
Posted: Mon Feb 24 21:58:02 1986
Date-Received: Wed, 26-Feb-86 05:12:01 EST
Distribution: net
Organization: NYIT Computer Graphics Lab., Old Westbury, N.Y.
Lines: 39

Could someone *PLEASE* help me...

	A collegue of mine has purchased:
		- An IBM PCjr RGB Monitor 
		- A Leading Edge PCXT clone (with color graphics card)

	The Leading Edge pinouts are known (for the color graphics board),
	but the signal inputs are *NOT* known for the IBM PCjr's color
	monitor.  We have had no luck in obtaining information from IBM
	on the monitor, and know of no one with the PCjr.  The connector
	one the monitor cable is the "header" type, and the Leading Edge
	expects a female, 9-pin D connector, just like the IBM PC.
	    Also, how do they number the pins on a "header" connector?
	I noticed that there was a notch adjacent to one of the pins,
	(I guess this is pin #1), but I don't know where to go from there.
			Thank you ever so much for your time...

UUCPaddress:...{allegra,decvax,seizmo,vax135,ihnp4,mcvax}!philabs!nyit!aca
CSNETaddress:...nyit!aca%suny-sb.CSnet@CSnet-Relay.ARPA
US Mail:
	Alex Arthur
	New York Institute of Technology
	Computer Graphics Laboratory
	Old Westbury, New York 11568

Phone: (516) 686-7644 


-- 

UUCPaddress:...{allegra,decvax,seizmo,vax135,ihnp4,mcvax}!philabs!nyit!aca
CSNETaddress:...nyit!aca%suny-sb.CSnet@CSnet-Relay.ARPA
US Mail:
	Alex Arthur
	New York Institute of Technology
	Computer Graphics Laboratory
	Old Westbury, New York 11568

Phone: (516) 686-7644