Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!allegra!mit-eddie!think!harvard!cmcl2!seismo!brl-smoke!smoke!eichelbe@nadc.ARPA
From: eichelbe@nadc.ARPA
Newsgroups: net.sources
Subject: Assembler for macro 11
Message-ID: <914@brl-smoke.ARPA>
Date: Thu, 13-Feb-86 16:20:06 EST
Article-I.D.: brl-smok.914
Posted: Thu Feb 13 16:20:06 1986
Date-Received: Sun, 16-Feb-86 06:04:16 EST
Sender: news@brl-smoke.ARPA
Lines: 15


	Does anyone know of an assembler for macro-11 (PDP 11/24, to be
specific) that will run under UNIX or MS-DOS or on a CDC Cyber?  We don't
really need a full assembler.  What we need is something to convert macro-11
into the numbers you normally see on the left hand side of an assembly listing.
Something public-domain that someone could send to me or point me to would
be what we really need, as there is a time factor involved with this project.
	If you have anything even close, please let me know.

	Thanks.
		Jon Eichelberger
		eichelbe@NADC.ARPA
P.S. To be clearer, the "assembler" can run on any one or the machines
mentioned.  Source for another machine would even be welcome, as we can
convert it.