Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/5/84; site ulowell.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!bellcore!decvax!wanginst!ulowell!burati
From: burati@ulowell.UUCP (Michael R. Burati)
Newsgroups: net.unix
Subject: Re: Nedd help connecting a VAX(750) to a UNIX machine
Message-ID: <212@ulowell.UUCP>
Date: Thu, 20-Feb-86 09:35:20 EST
Article-I.D.: ulowell.212
Posted: Thu Feb 20 09:35:20 1986
Date-Received: Fri, 21-Feb-86 07:51:33 EST
References: <274@cernvax.UUCP>
Reply-To: burati@ulowell.UUCP (Michael R. Burati)
Distribution: net
Organization: University of Lowell
Lines: 21
Keywords: VMS to UNIX login

In article <274@cernvax.UUCP> asfour@cernvax.UUCP (asfour) writes:
>I need to connect a UNIX system (System 5, v3.x) to a VAX750. I have
>been successfull in comunicating from UNIX to VMS via 'cu'. But
>how can I connect from the VAX to the UNIX machine??
>

	Assuming that you are using VMS 4.0 or higher, the command
"SET HOST/DTE" command should work fine connecting to your unix, or
most any other machine.

	I believe that you will have to set the outgoing port on the
VMS machine to NOTYPEAHEAD so that it will not allow logins and you
may want to set the ALTYPEAHEAD to allow buffering on the VMS end.

Michael Burati
University of Lowell
Computer Science Dept.
Lowell, MA

UUCP: ..wanginst!ulowell!burati
CSNET: burati@ulowell