Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: Notesfiles $Revision: 1.7.0.10 $; site techsup
Path: utzoo!watmath!clyde!burl!ulysses!mhuxr!mhuxn!ihnp4!inuxc!pur-ee!uiucdcs!convex!techsup!s0220
From: s0220@techsup
Newsgroups: net.auto.tech
Subject: Alarm wiring info wanted.
Message-ID: <-74821350@techsup>
Date: Mon, 10-Mar-86 09:28:00 EST
Article-I.D.: techsup.-74821350
Posted: Mon Mar 10 09:28:00 1986
Date-Received: Sat, 15-Mar-86 03:31:30 EST
Lines: 18
Nf-ID: #N:techsup:-74821350:000:739
Nf-From: techsup!s0220    Mar 10 08:28:00 1986



	I have an alarm for my car which was in my van about 4 yrs.ago, and
I would now like to install in my new car and cannot find the intructions

	The alarm is a current sensing type which is arm by turning the 
ignition to the Acc. position for several seconds.  It is disarmed when
you start the car.  It is all contained in one unit with the horn.

	The wiring is simple, fused orange line to battery hot, black to grnd
there are two other wires, pink and yellow one of which goes to the power line
of any device which receives power when the ignition is turned to Acc. the
other to any device which receives power when turned to ON.  The question
is which one goes where?

	If anyone has any info please pass it on.

 			Perry@techsup