Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP Posting-Version: version B 2.10.2 9/5/84; site randvax.UUCP Path: utzoo!watmath!clyde!cbosgd!hplabs!sdcrdcf!randvax!lacasse From: lacasse@randvax.UUCP (Mark LaCasse) Newsgroups: net.auto.tech Subject: Re: surface rust Message-ID: <121@randvax.UUCP> Date: Sat, 15-Mar-86 01:31:34 EST Article-I.D.: randvax.121 Posted: Sat Mar 15 01:31:34 1986 Date-Received: Mon, 17-Mar-86 04:06:30 EST References: <1600@vax3.fluke.UUCP> Reply-To: lacasse@rand-unix.UUCP (Mark LaCasse) Distribution: net Organization: Rand Corp., Santa Monica Lines: 31 I've used a product on rusty steel called "Extend" by Loctite, Inc. It is billed as a "rust inhibitor" or "rust sealer" or such. I didn't use it on a car, but have used it on steel outdoors (e.g. I-Beams). It is water base (easy to clean up and apply). You paint it on. You should remove lose falking rust first. It is almost clear, slightly pink. That is how it dries (almost clear) if you paint it on wood. When painted on steel or rust, it reacts chemically with the iron, and turns jet black. This takes a few minutes. In good weather, it dries in under an hour. It isn't the strongest surface, and will last much longer if followed up with another coating. The simple route for this is Auto paint, Rustoleum, or DeRusto (I used the last). I've also tried anhydrous polyurathane, and liked that a lot. It is VERY hard when dry. It is good on steel, and about anything else too. I think some airlines paint their 747's with this stuff. I've been pretty happy with the rust locking effect of the Extend, and with the hardness of the anhydrous polyurethane. I bought the Extend in a 1 gal. jug from an industrial distributor for about $35/gal (ouch). The anhydrous polyurethane is harder to find. I bought it for about $28/gal from a manufacturer or it, Western Specialities Coatings, in Los Angeles. Mark LaCasse qantel!hplabs!sdcrdcf!randvax!lacasse c/o The Rand Corporation cbosgd!ihnp4!sdcrdcf!randvax!lacasse 1700 Main Street lacasse@Rand-Unix Santa Monica, CA 90406 213/393-0411 ext. 7420