Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.3 4.3bsd-beta 6/6/85; site amdahl.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!bellcore!decvax!decwrl!amdcad!amdahl!acs
From: acs@amdahl.UUCP (Tony Sumrall)
Newsgroups: net.micro.amiga
Subject: Re: Serial Driver
Message-ID: <2884@amdahl.UUCP>
Date: Thu, 6-Mar-86 13:43:22 EST
Article-I.D.: amdahl.2884
Posted: Thu Mar  6 13:43:22 1986
Date-Received: Sat, 8-Mar-86 21:28:00 EST
References: <663@puff.UUCP> <800@amiga.amiga.UUCP>
Reply-To: acs@amdahl.UUCP (Tony Sumrall)
Organization: Amdahl Corporation, Sunnyvale CA
Lines: 19
Keywords: SetSerial DSR serial.h
Summary: Where's the bit?

In article <800@amiga.amiga.UUCP> tomp@stella.UUCP (Tom Pohorsky) writes
(in reponse to article <663@puff.UUCP> avery@puff.UUCP (Slippery Jim)):
>
> ... Typing "setserial 0" will list all the
> settable parameters, a perusal of serial.h or serial.i (in the ROM Kernel
> manual and elsewhere) will let you know the options available and the
> settings to use. Setserial is in the public domain, available from the 
> Fred Fish service, and (hopefully) your dealer. Typing "setserial 10 x84"
> will disable xON/xOFF flow control AND enable DSR flow control (we call
> it "7-wire protocol"). keep on slippin', tomp.

After inspection of serial.h I don't see a SerFlags for the x04 bit (of
the x84 you recommend).  Shouldn't this be defined in the include file or
have I missed something?
-- 
Tony Sumrall                    ...!{ihnp4,hplabs,seismo,sun}!amdahl!acs

[ Opinions expressed herein are the author's and should not be construed
  to reflect the views of Amdahl Corp. ]