Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!cbosgd!ihnp4!houxm!whuxl!whuxlm!akgua!gatech!seismo!brl-adm!brl-smoke!gwyn
From: gwyn@brl-smoke.UUCP
Newsgroups: net.micro.apple
Subject: Re: Need TERMINFO for Apple Access
Message-ID: <1823@brl-smoke.ARPA>
Date: Fri, 14-Mar-86 17:34:41 EST
Article-I.D.: brl-smok.1823
Posted: Fri Mar 14 17:34:41 1986
Date-Received: Mon, 17-Mar-86 04:15:50 EST
References: <112@nvuxb.UUCP> <388@chinet.UUCP>
Reply-To: gwyn@brl.ARPA
Organization: Ballistic Research Lab (BRL)
Lines: 21

>What I am looking for is termcaps/terminfo info for a IIe/IIc WITHOUT a
>terminal "emulator" as such - a friend is using the firmware within a
>Prometheus card to talk to work.  It has data capture and transfer
>capabilities, but does no emulation; just vanilla Apple.

#
# Apple //e with 80-column card
# The modem interface is permitted to discard LF (maybe DC1), otherwise
# passing characters to the 80-column firmware via COUT (PR#3 assumed).
# Auto-wrap does not work right due to newline scrolling delay, which also
# requires that you set "stty cr2".
# Note: Cursor addressing is only available via the Pascal V1.1 entry,
# not via the BASIC PR#3 hook.  All this nonsense can be avoided only by
# using a terminal emulation program instead of the built-in firmware.
ab|apple2e|Apple //e:\
	:bl=^G:bw:cd=4*^K:ce=4^]:cl=100^L:co#80:ho=^Y:is=^R^N:kd=^J:kl=^H:\
	:kr=^U:ku=^K:li#24:me=^N:mr=^O:ms:nw=100\r:rs=^R^N:se=^N:sf=^W:so=^O:\
	:sr=^V:up=^_:\
	:bs:nc:
ap|apple2e-p|Apple //e via Pascal:\
	:cm=^^%r%+ %+ :tc=apple2e: