Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!allegra!princeton!orsvax1!pyrnj!caip!bloom
From: bloom@caip.RUTGERS.EDU (Dave )
Newsgroups: net.micro.att
Subject: 3B2 carrier high?
Message-ID: <1545@caip.RUTGERS.EDU>
Date: Tue, 18-Mar-86 14:49:58 EST
Article-I.D.: caip.1545
Posted: Tue Mar 18 14:49:58 1986
Date-Received: Fri, 21-Mar-86 03:31:55 EST
Organization: Rutgers Univ., New Brunswick, N.J.
Lines: 16

<>
Is there some 3B2 command which will trick a port
into thinking that there is a device with a high
carrier connected to it? More specifically, we have
a maxwell modem connected to our 3B2 via contty port,
which works fine on dial-in but the 3B does not see
the modem on dialout. Since there is no HARDWARE set-
ting on the modem to set carrier high, I am looking
for alternative solutions. PREFERABLY a 'set carrier
high' command on the 3B would solve our problem.

Any Ideas?

Thanx.

Dave