Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/5/84; site tolerant.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!bellcore!decvax!ittatc!dcdwest!sdcsvax!ucbvax!hplabs!oliveb!tolerant!kevin
From: kevin@tolerant.UUCP (Kevin Flory)
Newsgroups: net.micro.cpm
Subject: Re: CCS: Company going under?/info needed
Message-ID: <294@tolerant.UUCP>
Date: Thu, 6-Mar-86 14:17:29 EST
Article-I.D.: tolerant.294
Posted: Thu Mar  6 14:17:29 1986
Date-Received: Sun, 9-Mar-86 00:41:27 EST
References: <1308@brl-smoke.ARPA>
Organization: Tolerant Systems, Inc.  San Jose, CA
Lines: 30


> Kevin Belles writes:
> 
>   One last thing;  has anything special been done with a CCS 2810 
> & 2422 board combination? We down here are especially looking for 
> interesting  things done with the a custom  BIOS,  ie.  CP/M  3+, 
> banking,  ZCPR or Z-DOS , and MP/M implementations. We are trying 
> to do some interesting things with them,  and would appreciate it 
> if  any  help or programs were sent our way.  We are planning  to 
> archive  all  info  we  get,  and will  be  more  than  happy  to 
> retransmit as needed.
> 
>                              Thanks,
>                           Kevin Belles
> 

I currently have a BIOS for CPM 3 that I am currently debugging a driver
for the CCS 2422, I am using a Cromemco SCC for the CPU but drivers will
be available for the CCS 2810, Its just matter of supporting the UART.

If you are interrested in abtaing this BIOS from me send me EMAIL.
I am not currently ready to make it public domain (lack of documentation)
but if your still interrested contact me. The BIOS is designed to be
modular with seperate drivers for the various supportted boards. Currently
I have drivers for the Cromemco SCC, Cromemco TUART, Xebec S1410 hard disk
controller, Xebec SASI interface board for the S100 bus, NCR 5380 SCSI
controller chip.  


Kevin Flory @ Tolerant Systems, San Jose, CA.