Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.PCS 1/10/84; site mtuxo.UUCP
Path: utzoo!watmath!clyde!cbosgd!ihnp4!houxm!mtuxo!rll
From: rll@mtuxo.UUCP (r.lemar)
Newsgroups: net.micro.mac
Subject: Imagewriter losing one row
Message-ID: <1403@mtuxo.UUCP>
Date: Wed, 12-Mar-86 18:58:41 EST
Article-I.D.: mtuxo.1403
Posted: Wed Mar 12 18:58:41 1986
Date-Received: Fri, 14-Mar-86 06:15:57 EST
Organization: AT&T Information Systems Labs, Holmdel NJ
Lines: 14

I recently did the poor-mans reinking, i.e. spraying WD-40, on my old
Imagewriter. Now one of the (7 or 9, I don't know for sure) impact rods
doesn't seem to move far enough in to cause impact. I took the little
print head off, and cleaned the hell out of it, and this didn't seem
to make any difference. I also made sure the WD-40 didn't get all over
the place. Now, I get a nice dark output, but one row of dots is always
missing. I should add that it was starting to miss the one row before I
reinked (re-solvented) it. Do I need to replace the head?????  :-(
Thanks in advance,
-- 

Chip LeMar    201-957-2616  

Cute quote goes here. I don't have one yet.