Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.3 4.3bsd-beta 6/6/85; site amdcad.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!mhuxr!mhuxn!ihnp4!amdcad!jimb
From: jimb@amdcad.UUCP (Jim Budler)
Newsgroups: net.micro.mac
Subject: Tilde for MacTerminal 2.0
Message-ID: <10878@amdcad.UUCP>
Date: Thu, 20-Mar-86 00:02:00 EST
Article-I.D.: amdcad.10878
Posted: Thu Mar 20 00:02:00 1986
Date-Received: Fri, 21-Mar-86 06:13:58 EST
Reply-To: jimb@amdcad.UUCP (Jim Budler)
Organization: AMD, Sunnyvale, California
Lines: 34

I saw a few people ask again about how to make the '~' key easy to
use on MacTerminal 2.0, so I'll describe the process again:

	1. Use ResEdit (I think any version, but 0.7 and up for sure)
	2. Open MacTerminal 2.0
	3. Open KICH
	4. Open KICH ID=256
	5. Look for the following sequence:
		1B 60 1B 7E  1B 60 1B 7E
		1B 60 1B 7E  1B 60 1B 7E

	6. Replace it with:
		1B 60 7E 7E  1B 60 7E 7E
		7E 60 7E 7E  7E 60 7E 7E

	7. Close KICH ID=256
	8. Close KICH
	9. Close and save MacTerminal 2.0

The ~/` key now will work as follows:

	alone		->	ESC
	SHIFT		->	~
	CAPSLOCK	->	ESC
	COMMAND		->	`

Have fun.

-- 
 Jim Budler
 Advanced Micro Devices, Inc.
 (408) 749-5806
 Usenet: {ucbvax,decwrl,ihnp4,allegra,intelca}!amdcad!jimb
 Compuserve:	72415,1200