Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.3 (USS@Tek, v1.0) based on 4.3bsd-beta 6/6/85; site tekcbi.UUCP
Path: utzoo!watmath!clyde!cbosgd!ihnp4!hplabs!tektronix!tekcbi!jimb
From: jimb@tekcbi.UUCP (Jim Boland)
Newsgroups: net.sources
Subject: MICROEMACS COMMANDS
Message-ID: <556@tekcbi.UUCP>
Date: Wed, 19-Mar-86 13:38:20 EST
Article-I.D.: tekcbi.556
Posted: Wed Mar 19 13:38:20 1986
Date-Received: Fri, 21-Mar-86 07:14:21 EST
Distribution: na
Organization: Tektronix, Inc., Beaverton, OR
Lines: 137
Keywords: here is your reference card

MICROEMACS  COMMAND  SUMMARY

<ctrl-@>	Set Mark at current position.
<ctrl-A>	Move cursor to beginning of line.
<ctrl-B>	Move cursor BACK one character.
<ctrl-C>	Push to a new interactive command shell.
<ctrl-D>	DELETE current current character.
<ctrl-E>	Move cursor to END of line.
<ctrl-F>	Move cursor FORWARD one character.
<ctrl-G>	Abort any command. (shades of Teco).
<ctrl-H>	(backspace) delete previous character.
<ctrl-K>	KILL (delete) to end of line.
<ctrl-L>	Redisplay screen.
<ctrl-N>	Move cursor to NEXT line.
<ctrl-O>	OPEN a new line.
<ctrl-P>	Move to PREVIOUS line.
<ctrl-Q>	QUOTE the next character (insert the next character typed).
<ctrl-R>	REVERSE Search.
<ctrl-S>	Forward SEARCH.
<ctrl-T>	TRANSPOSE characters.
<ctrl-U>	Enter repete count for next command.
<ctrl-V>	VIEW the next screen (scroll up one screen).
<ctrl-W>	Kill region (all text between cursor and last mark set).
<ctrl-Y>	YANK (undelete) last text killed (deleted).
<ctrl-Z>	Save file in current buffer and exit.

<ctrl-X>(	Begin keyboard Macro.
<ctrl-X>)	End keyboard Macro.
<ctrl-X>1	Display only current window.
<ctrl-X>2	Split the current window.
<ctrl-X>B	Prompt for new BUFFER.
<ctrl-X>E	EXECUTE keyborad Macro.
<ctrl-X>K	KILL a buffer.
<ctrl-X>N	Move to NEXT window.
<ctrl-X>P	Move to PREVIOUS window.
<ctrl-X>Z	Enlarge current window by repete count <ctrl-U> lines.

<ctrl-X><ctrl-B> Show active BUFFERS.
<ctrl-X><ctrl-C> Exit without saveing buffers.
<ctrl-X><ctrl-F> FIND file.  ?non-working?
<ctrl-X><ctrl-N> Scroll current window up by repete count lines.
<ctrl-X><ctrl-P> Scroll current window up by repete count lines.
<ctrl-X><ctrl-R> READ file into current buffer.
<ctrl-X><ctrl-S> SAVE (write) current buffer into its file.
<ctrl-X><ctrl-V> VISIT a file. Read file and display in current window.
<ctrl-X><ctrl-W> WRITE buffer to file.
<ctrl-X><ctrl-Z> Reduce current window by repete count lines.

<del>		delete previous character.

<esc>!		Move current line to repete count lines from top of window.
<esc>>		Move cursor to end of buffer.
<esc><		Move cursor to beginning of buffer.
<esc>B		Move cursor BACK one word.
<esc>C		CAPITALIZE (Capitalize) word.
<esc>D		DELETE next word.
<esc><del>	DELETE previous word.
<esc>F		Move cursor FORWARD one word.
<esc>L		LOWERCASE (lowercase) next word.
<esc>U		UPPERCASE (UPPERCASE) next word.
<esc>V		VIEW the previous screen (scroll down one screen).

-----------------------------

C-@		set mark
C-A		move to start of line
C-B		move backward character
C-C		run CLI in a subjob
C-D		delete forward character
C-E		move to end of line
C-F		move forward character
C-G		abort command
C-H		delete backward character
C-I		insert tab
C-J		insert CR-LF, then indent
C-K		kill forward
C-L		refresh the screen
C-M		insert CR-LF
C-N		move forward line
C-O		open up a blank line
C-P		move backward line
C-Q		insert literal character
C-R		search backwards
C-S		search forward
C-T		swap characters around point
C-U		universal argument
C-V		move forward page
C-W		kill region
C-X		control-X prefix - see below
C-Y		yank back from killbuffer
C-Z		quick save and exit
esc		meta prefix - see below
del		delete backward character

M-C-H		delete backward word
M-!		reposition window
M-.		set mark
M-<		move to start of buffer
M->		move to end of buffer
M-B		move backward word
M-C		initial capitalize word
M-D		delete forward word
M-F		move forward word
M-L		lower case word
M-U		upper case word
M-V		move backward page
M-W		copy region to kill buffer
M-del		delete backward word

C-X C-B		display list of buffers
C-X C-C		quit without saving
C-X C-F		adjust file name
C-X C-L		lower case region
C-X C-N		move window down
C-X C-O		delete blank lines
C-X C-P		move window up
C-X C-R		get a file, read only
C-X C-S		save current file
C-X C-U		upper case region
C-X C-V		get a file, read write
C-X C-W		write a file
C-X C-X		swap point and mark
C-X C-Z		shrink window

C-X !		run a command in a subjob
C-X (		begin macro
C-X )		end macro
C-X 1		make current window only one
C-X 2		split current window
C-X =		show the cursor position
C-X B		switch a window to a buffer
C-X E		execute macro
C-X F		set fill column
C-X K		make a buffer go away
C-X N		move to the next window
C-X P		move to the previous window
C-X Z		enlarge display window