Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.3 4.3bsd-beta 6/6/85; site amdahl.UUCP
Path: utzoo!watmath!clyde!cbosgd!hplabs!amdahl!wre
From: wre@amdahl.UUCP (Estrada)
Newsgroups: net.general
Subject: Need Hardware help!
Message-ID: <2970@amdahl.UUCP>
Date: Thu, 27-Mar-86 19:20:26 EST
Article-I.D.: amdahl.2970
Posted: Thu Mar 27 19:20:26 1986
Date-Received: Sat, 29-Mar-86 04:43:35 EST
Organization: Amdahl Corp, Sunnyvale CA
Lines: 18
Keywords: Electrical switch


    Hello.  I have a problem that some of you may be able to help with.
I have a 12VDC to 120VAC inverter that I want to place next to the power
source (batteries) outside of my house.  The problem is that, it is not a
demand start type.  So I wish to place an electronic switch which:

    1. Requires low power to run.
    2. Requires no power when off.
    3. It would be nice if would power on when a load is put on output
       side of the inverter.  (demand start)
    4. Easy to build.  <-----  Important!

   Please Email any designs or comments.

                                             Thanks, Rick.
-- 
/*  This is the standard disclaimer that the above junk is mine alone.  */
/*                  path={hplabs,ihnp4}!amdahl!wre                      */