Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 6/24/83; site isucs1.UUCP
Path: utzoo!watmath!clyde!cbosgd!ihnp4!stolaf!umn-cs!isucs1!notes
From: notes@isucs1.UUCP
Newsgroups: net.micro.apple
Subject: Needed: Apple [][ Kermit source
Message-ID: <541@isucs1.UUCP>
Date: Tue, 1-Apr-86 07:10:26 EST
Article-I.D.: isucs1.541
Posted: Tue Apr  1 07:10:26 1986
Date-Received: Thu, 10-Apr-86 21:26:15 EST
Sender: notes@isucs1.UUCP
Organization: Iowa State University
Lines: 20
Nf-ID: #N:isucs1:9900026:000:787
Nf-From: isucs1!heins    Apr  1 01:47:00 1986


   Does anyone on the net have 6502 assembler source for the Apple version
of Kermit 65?  If so, I'd like to get one, as I have had no luck with any
of the distributed binaries (they don't support much hardware - only the
most common interfaces, and don't support 80 columns at all)  What I need
is an 80 column capable Kermit that supports either a Mountain Hardware
CPS Multifunction Serial port, or a Novation Apple Cat ][.  The 80
column board I have is a ALS Smarterm.
   If anyone has a clue as to where I can get source to Kermit, E-Mail to
me please.

				Lee Heins
			UUCP:   {okstate | umn-cs}!isucs1!heins
			CSNET:  heins@iowa-state
			Phone:  515/232-9057
			USnail: 404 Garden Road
				Ames, Iowa 50010

Disclaimer: Who would possibly take anything I say seriously? :-)