Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 6/24/83; site trwrba.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!bellcore!decvax!decwrl!pyramid!hplabs!sdcrdcf!trwrb!trwrba!mdf
From: mdf@trwrba.UUCP (Mark D. Falleroni)
Newsgroups: net.micro.atari16
Subject: Upgrade
Message-ID: <1993@trwrba.UUCP>
Date: Tue, 15-Apr-86 10:43:06 EST
Article-I.D.: trwrba.1993
Posted: Tue Apr 15 10:43:06 1986
Date-Received: Fri, 18-Apr-86 04:06:27 EST
Organization: TRW EDS, Redondo Beach, CA
Lines: 16


A few weeks ago I posted a plea for help about a problem I was having
with my 1 meg upgrade.  I won't repeat the lengthy problem description
again but I will describe the solution.  
The problem (screen going bonkers when oscilloscope probe touched RAS
connection of upgrade) was eliminated when the 68 ohm resistors were
replaced with 33 ohm resistors.  
The only response I received from my plea was from a hardware expert
at Atari Corp.  That dispelled any bad thoughts I harbored about 
Atari customer support.  Thanks Doug.

		Mark Falleroni
		TRW Defense Systems
		Ogden Engineering Office
		Ogden, Utah 84403
		<mdf>