Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.3 4.3bsd-beta 6/6/85; site ucbvax.BERKELEY.EDU
Path: utzoo!watmath!clyde!burl!ulysses!ucbvax!ritvaxa.BITNET!jeb6589
From: jeb6589@RITVAXA.BITNET (Jim Berg)
Newsgroups: net.micro.atari8
Subject: RE: VT-100 EMULATORS
Message-ID: <8603270658.AA07034@ucbvax.berkeley.edu>
Date: Thu, 27-Mar-86 01:59:23 EST
Article-I.D.: ucbvax.8603270658.AA07034
Posted: Thu Mar 27 01:59:23 1986
Date-Received: Fri, 28-Mar-86 05:53:22 EST
Sender: daemon@ucbvax.BERKELEY.EDU
Organization: RIT, Rochester NY
Lines: 18


     The VT-10SQ or VT-10XL program I beleive comes set up for the 850
interface.  I suggest you look for another program on compuserve call VT10NH
or something like that, it is supposed to be the VT-10SQ program without any
handler.  So you should be able to append it to a handler and get it to work
with your 1030.  It definitely won't work as is, because it looks for an R:
device of some type.  I got the VT-10HN program to work with my R-Verter by
appending it to my R-Verter driver.

     Two bugs?  I have noticed are:

       1)  I can't get it to work in 1200 baud mode always goes to 300 baud.

       2)  Doesn't work right with the EDT screen editor - works fine with vi.

     Hope this helps.

                                -- Jim