Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.1 6/24/83; site ecrhub.UUCP
Path: utzoo!hcrvax!ecrhub!david
From: david@ecrhub.UUCP (David M. Haynes)
Newsgroups: net.micro.pc,net.graphics
Subject: Looking for Venix Hercules Driver
Message-ID: <377@ecrhub.UUCP>
Date: Mon, 24-Mar-86 12:37:16 EST
Article-I.D.: ecrhub.377
Posted: Mon Mar 24 12:37:16 1986
Date-Received: Thu, 27-Mar-86 05:04:04 EST
Organization: Emerald City Research, Toronto
Lines: 28

nudge, nudge - wink, wink

Does anybody have the source for a Venix driver for the 
Hercules graphics board? I have tried to modify the driver
provided in the Hercules graphics book (written for the
Intel assembler, not the Venix assembler) but have only
managed to soft-boot PC which is not quite what I had in 
mind.

Any help would be appreciated. Also, does anyone have a
source in Canada or the northeastern United States for
Number Nine boards? Anyone have experience with these 
boards?

Thanks!
-david-
-- 
--------------------------------------------------------------------------
David Haynes
David Haynes & Associates

--- utzoo -+- yetti --- utrc-2at -+- utrc-3at -+- dmh --- david
           |                      |            +- davidh
           |                      +- davidh
           +- ecrhub --- david

Emerald City Research Inc. is very kind to let me use their machine, but
in no way is even remotely responsible for the stuff I post.