Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: Notesfiles $Revision: 1.7.0.10 $; site uokvax.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!mhuxr!mhuxn!ihnp4!inuxc!pur-ee!uiucdcs!okstate.UUCP!uokvax.UUCP!kent
From: kent@uokvax.UUCP
Newsgroups: net.micro.pc
Subject: Re: 8087 opcodes needed
Message-ID: <3700004@uokvax.UUCP>
Date: Wed, 9-Apr-86 16:00:00 EST
Article-I.D.: uokvax.3700004
Posted: Wed Apr  9 16:00:00 1986
Date-Received: Wed, 16-Apr-86 03:11:04 EST
References: <292@cernvax.UUCP>
Lines: 11
Nf-ID: #R:cernvax.UUCP:292:uokvax.UUCP:3700004:000:364
Nf-From: uokvax.UUCP!kent    Apr  9 15:00:00 1986



	I have Microsoft Macro Assembler v4.0 and it came with a
	small Intel handbook that has all the codes for the 8088/86/286
	and all the 8087/287 in it. If this was not included with 
	your assembler then I am sure that you could get a copy through
	Intel (since this handbook was printed by them).
	I hope this helps you.
					Kent Malave'
					uokvax!kent