Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Posting-Version: version B 2.10.2 9/18/84; site dciem.UUCP
Path: utzoo!dciem!frank
From: frank@dciem.UUCP (Frank Evans)
Newsgroups: net.micro.trs-80
Subject: TRS MOdel 100's Terminal Emulation Abilities??
Message-ID: <1835@dciem.UUCP>
Date: Wed, 9-Apr-86 11:34:51 EST
Article-I.D.: dciem.1835
Posted: Wed Apr  9 11:34:51 1986
Date-Received: Wed, 9-Apr-86 16:34:37 EST
Distribution: net
Organization: D.C.I.E.M., Toronto, Canada
Lines: 17

I am trying to connect a TRS 100 to the ternminal wall jack in order to
communicteate with a PAX system. I connected a RS-232 to the TRS 100 and
and to the PAX. I followed the wiring diagram in the TRS 100's manual
but there is anbsolutely no response form the PAX.

There does appear to be signals coming out of the RS-232 from the TRS
100 but we have been unable to generate a 'Break"' command from the TRS.
I have tried all sorts of keys including the (Shift-Pause) key as well a 
as all sorts of terminal configurations. but there is still no response!

DoesHas anyone had any experience with connected a TRS 100 to another comput      
computer?? What wiring set upup have you used on your RS-232 and what
is your setup criteria 'StaTTAT' on your TRS 100??

I should say that I can communictecate to the PAX thvia the modem/phone lines.

Any help in this problem would be deeply appreciated!!