Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!linus!philabs!cmcl2!harvard!husc6!panda!genrad!decvax!tektronix!tekgen!sytek
From: sytek@tekgen.UUCP (Mike Ewan)
Newsgroups: net.lan,net.unix
Subject: Re: CP/M running under Unix
Message-ID: <22@tekgen.UUCP>
Date: Mon, 28-Apr-86 11:50:22 EDT
Article-I.D.: tekgen.22
Posted: Mon Apr 28 11:50:22 1986
Date-Received: Fri, 2-May-86 20:43:14 EDT
References: <389@ms3.UUCP>
Reply-To: sytek@tekgen.UUCP (Mike Ewan)
Organization: Tektronix, Inc., Beaverton, OR.
Lines: 37
Keywords: CP/M,UNIX
Xref: linus net.lan:1279 net.unix:7107

In article <389@ms3.UUCP> msitd22@ms3.UUCP (Jim Chappell) writes:
>Our site has a Sytek LAN acting as a front-end (terminal logins)
>and controlled by a UNIX-based  Network Control Center (NCC).  
>We have an Ungerman-Bass (UB) LAN serving the back-end (file transfers)
>and controlled by a CP/M-based NCC.
>
>We're inteested in moving the UB NCC to the same UNIX box serving the
>Sytek NCC.
>
>Are there any CP/M emulators out there that would allow this?
>
We at Tek also have a Sytek LAN and NCC's.  We have also evaluated the 
UB LAN's.

From what I've heard, even if you can find a CP/M emulator for unix, it's 
going to be EXTREMELY slow.  Anyway, the UB software running on the NCC isn't
going to know where to find it's NIU.  In other words, what you want to do
won't work.

My suggestion is to trade in your UB NCF on one of their NMC's.  This unit
is a IBM PC/XT (works in an AT also) with a PC-NIU installed.  I think your 
running something like Ver. 10 software on your NCF.  The current version 
on the NMC is 14.  This version uses windows instead of all the boring menus 
on version 10, and is about 4 times faster.  It also supports all UB's 
new 180, 130, and 74/78 products.

If you already have an XT or AT around you can just buy the PC-NIU and
software.


Mike Ewan
Broadband Network Operations
Tektronix Inc.
PO Box 500  MS 19-442
Beaverton OR 97077

(All the opinions herein are those of the author only)