Relay-Version: version B 2.10 5/3/83; site utzoo.UUCP
Path: utzoo!watmath!clyde!burl!ulysses!mhuxr!mhuxn!ihnp4!qantel!lll-lcc!lll-crg!seismo!brl-adm!brl-smoke!smoke!CUDDY%UMKCVAX1.BITNET@WISCVM.WISC.EDU
From: CUDDY%UMKCVAX1.BITNET@WISCVM.WISC.EDU
Newsgroups: net.micro
Subject: Call for help
Message-ID: <514@brl-smoke.ARPA>
Date: Sat, 3-May-86 11:37:46 EDT
Article-I.D.: brl-smok.514
Posted: Sat May  3 11:37:46 1986
Date-Received: Wed, 7-May-86 06:20:43 EDT
Sender: news@brl-smoke.ARPA
Lines: 11

I have a problem I would appreciate some insight into if possible.
I am running asynchronous communications on an PC-AT with an internal Hayes
1200B.  When I call up Crosstalk the modem tells me it is already
connected to a call.  The modem is set correctly, and has been examined
for problems (its fine).  Any ideas on what could be the problem here.
I suspect it is in the machine.  A cold reboot frequently clears the
problem up, whereas a simple crtl-alt-del does not.

Please advise.
Thanx for the assistance.
cuddy@umkcvax1.bitnet